Welding Equipment / Welding & Soldering - Page 3 - Super Savings! Save up to 38%


Super Savings! Up to 38% off on Welding Equipment (in Welding & Soldering) at My Core Franchise, Page 3 [107]. Top brands include MG Chemicals, Kester, Weller, Hardware & Outdoor, Strong Hand Tools, Yaheetech, AUSTOR, Neiko, HARRIS, Farmunion, Alumaloy, Thermal Grizzly, IGREAT, Lotos Technology, Jounjip, Tig-Pen, ChipQuik, AGPTEK, & Kester Solder. Hurry! Limited time offers. Offers valid only while supplies last.



MG Chemicals Liquid Rosin Flux, for Leaded and Lead Free Solder, 125 ml Bottle
By MG Chemicals
In Stock
$13.96
$8.61
You Save: 38%

mpn: 835-100ML, ean: 7147905859821,

4.8 out of 5 stars with 21 reviews
The 835 Rosin Flux contains a type RA rosin-activated flux composed of pure Water White (WW) grade gum rosin. It is a unique solvent system that contains very effective activators. The superior fluxing remains consistent throughout the entire aeration process. The 835 provides fast wetting action and complies with all requirements for type ROM1 flux per J-STD-004. Application: The rosin flux is designed for leaded and lead-free chemistries. Excellent for prototyping and rework/repair on printed


Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter
By Kester
In Stock
$26.95
$21.82
You Save: 19%

mpn: 24-6337-0027, ean: 0961756440314,

4.3 out of 5 stars with 20 reviews
Rosin'' 44'' is a high activity RA core flux designed for excellent instant wetting action, even on nickel surfaces. Although'' 44'' is a ra-based material, the residues are non-corrosive If not cleaned. Per j-std-004b,'' 44'' is classified as Rom1 flux.Core size: 66. 0.031 inch. Composition: 63 percent tin, 37 percent lead.


Weller 7135W: Weller/Ungar Unplated Copper Replacement Tips for 8200-3 (2/pkg.)
By Weller
In Stock
$10.32
$7.99
You Save: 23%

mpn: 1, ean: 7535001180060,

4.5 out of 5 stars with 55 reviews
Weller 7135 Weller Ungar Unplated Copper Replacement Tips for 8200 2 pkgstandard replacement tip for Weller soldering guns. fits 8200 and 9200 solder guns.


No Clean Lead Free Low Temperature Solder Paste 15 Grams
By Hardware & Outdoor
In Stock
$10.99

mpn: FBA_HRD-PN-79085520, ean: 0700254126333,

4.4 out of 5 stars with 19 reviews
Low Melting Point Solder Paste. T4 new industry standard. Contains Silver for less brittle joint. 137C 278F Melting Point (Eutectic). Two dispensing tips 16g and 20g.


Strong Hand Tools, Grasshopper Welding Finger, AGH230
By Strong Hand Tools
In Stock
$26.95

mpn: B0792CGDCX, ean: 0679352008905,

4.9 out of 5 stars with 33 reviews
Steady small parts, such as: bolts, nuts, and thin plates for tack welding at odd angles with full welding clearance. No other device can do what the Grasshopper does! Brass Tip + Magnetic V-Pad Base with Max. Pull Force 35 lbsSteady small parts, such as: bolts, nuts, and thin plates for tack welding at odd angles with full welding clearance. No other device can do what the Grasshopper does!. Brass Tip + Magnetic V-Pad Base with Max. Pull Force 35 lbs.


Yaheetech 3-Tier Welding Cart MIG TIG ARC Plasma Cutter Welder Welding Cart Universal W/Tank Storage, 176lbs Capacity Black
By Yaheetech
In Stock
$49.99

mpn: YA-921, ean: 6902042186909,

4.2 out of 5 stars with 20 reviews
Description This three-tier welding cart puts the welder controls at a comfortable working height and has storage shelves for all your tools, parts and accessories. The slanted top shelf accommodates most brands of welding equipment and places the welder controls at an easy to use angle. Heavy duty with a total load capacity of up to 80kg so you can use it for a quick welding job or a big project. Made from super strong metal that is perfect for a workshop or garage. Easy accesses handle for p


AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool
By AUSTOR
In Stock
$15.99
$10.99
You Save: 31%

ean: 0601263548355,

4.5 out of 5 stars with 13 reviews
AUSTOR 7 Pieces Solder Sucker & Desoldering Wick kit, including 1 Piece Desoldering Sucker and 6 Pieces Solder Braid Solder Wick Product instruction How to Use the Solder Sucker Product instruction How to use the solder sucker First: press down the plunger until it is locked with the sucker. Second: heat up the solder until it become liquid. Next: place the solder sucker near to the liquid,then press the button. Last: repeat this process if needed. Note 1. Don't take apart the nylon suction no


Neiko 10908A Fiberglass Welding Blanket and Cover, 4' x 6' | Brass Grommets For Easy Hanging and Protection
By Neiko
In Stock
$22.99

mpn: 10908A, ean: 0837013109082,

4.4 out of 5 stars with 44 reviews
The Neiko Welding Blanket protects equipment and working area from sparks, flares and spatter while welding. This is an essential for safety measures.100% FLAME RETARDENT: durable and general purpose welding blanket to prevent property damages from sparks and spatter. HEAVY DUTY: 19.8 oz./ sq.yd. fiberglass to provide excellent thermal protection. PREMIUM WEAVING PATTERN: 30 x 30 per square inch for added durability and stands up to long term repeated use. WORKING TEMPERATURE: up to 1000°F (537


Neiko 53847A Industrial Grade Welding Helmet with Flip Lens, Shade 11 | Meets ANSI Z87.1
By Neiko
In Stock
$16.95

mpn: 53847A, ean: 7535001563450,

4.5 out of 5 stars with 56 reviews
This professional Welding Helmet protects users against UV and IR light. The large 2'' X 4 1/4'' lift front viewing area is of shade #11. Two-way adjustable headband ensures a comfortable fit. The helmet meets ANSI Z87.1 standards.Industrial-grade welding helmet with flip-up lens designed for maximum safety and comfort against UV and IR light. Compliant with ANSI Z87.1-2010 and CE EN175 requirements for RX safety eyewear; made from impact resistant polypropylene. Includes handy flip-up #11 shade


Harris Welding Helmet/Hood Clear Lens Cover 2" x 4.25", 10 pack, 1010010
By HARRIS
In Stock
$10.50

mpn: 1010010, ean: 0688940432282,

4.4 out of 5 stars with 52 reviews
Includes 10 lens covers Clear Plastic 2'' x 4. 25'' (51mm x 108mm)Includes 10 lens covers. Clear plastic. 2'' X 4. 25'' (51mm x 108mm).


Farmunion 24PCS SG-55 AG-60 WSD-60 Plasma Cutter Cutting Torch Tip Nozzles Consumables Kit
By Farmunion
In Stock
$16.59

mpn: Na, ean: 0602815453295,

4.8 out of 5 stars with 57 reviews
Size: Electrode nozzle: Length about 21mm Bottom diameter 12mm Diameter of the top 6mm Electrode: Length about 27mm Diameter of body about 5mm Protective case: Height about 22mm Bottom diameter about 25mm Diameter of the top about 20mm Isolation block: Height about 27mm Package included: 10 x electrode nozzles 10 x electrodes 2 x protective cases 2 x isolation blocksplasma cutting Pilot Arc torch head set, SG-55, AG-60,WSD-60P plasma torch spacer guide. Color:Sliver+light purple. Material:Metal+


Aluminum Repair 5 Rod Kit
By Alumaloy
In Stock
$16.99

ean: 0616316445413,

4.4 out of 5 stars with 11 reviews
Alumaloy is a superior welding product resulting in NO flux and NO expensive welding equipment needed. Alumaloy breaks down at 728° F and is stronger than Aluminum. Alumaloy's superiority to other products is derived from a superior magnesium mixture resulting in less sparks, making it easier to use and extremely durable. As seen on TV, Alumaloy is a fluxless repair rod. All that is required for use is a propane torch and something to clean the aluminum surface being repaired. Alumaloy can fill


Thermal Grizzly Conductonaut Thermal Grease Paste - 1 Gram Set + 3X Extra Applicators
By Thermal Grizzly
In Stock
$22.99

mpn: TG-AL-3 + TG-C-001-R, ean: 4260477451354,

4.8 out of 5 stars with 20 reviews
Thermal Paste from Thermal Grizzly is the best on market. Perfect for Delid your Intel CPU or for Laptops.Convenient 1.0 gram syringe, making this thermal paste very easy to apply. Delivers optimal heat transfer for larger-scale cooling systems. Designed for applications where heat dissipation is of critical importance. Popular choice for very experience PC builders.


6pcs Weller ET Soldering Iron Replacement Tips for WES51/50,WESD51,WE1010NA,PES51 / 50,LR21 ET Tip Series (6PCS-02)
By IGREAT
In Stock
$12.99

ean: 0686560231490,

4.0 out of 5 stars with 60 reviews
IGREAT Solder Tips For WELLER ET Soldering Iron Tips ,Copper-based structure of st soldering tips make better heat transfer performance, having good ability to hang tin. ▲Compatible with EC1201A,EC1204A,PES50,PES51/WCC101 soldering iron,DEC1001,WESD51,WES51,WES51D/WCC100 solder station. ▲Tip size 0.03in.(0.8mm),reach length 1in.(25mm),ideal for micro soldering applications such as soldering small components on circuit boards★Weller ET Tips★6PCS pack of conical tip,size .03''/0.8mm. ★Wi


Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
By Lotos Technology
In Stock
$448.00
$418.16
You Save: 7%

mpn: LTP5000D, ean: 0736211808677,

4.6 out of 5 stars with 16 reviews
About Lotos TechnologyHeadquartered in Sunnyvale, California, USA, Lotos Technology supplies quality welding and cutting tools to small businesses and Do-It-Yourself (DIY) buyers. Since 2007, our products have gained recognition as a reputable source for affordable industrial and consumer based portable plasma cutters and welders. We are proud of our product, quality and after-sale service. We offer quality welding and cutting tools to small businesses and DIY buyers. Our tools help you with you


Jounjip Plastic Welding Kit with 20 Black Plastic Rods and Mesh, 80W Iron
By Jounjip
In Stock
$39.99
$29.99
You Save: 25%

ean: 0711237818015,

4.8 out of 5 stars with 54 reviews
This 80-Watt welding iron heats up quickly to a maximum temperature of 525 degrees F and can easily handle repairs on TPO, TEO and PP materials, which are often used in car bumpers. The welding iron comes with a standard multipurpose welding rod, steel wire mesh, extra plastic welding rods and wire brushRepair TPO, TEO, and PP materials. 80-watt plastic welding iron quickly heats up to 525 degrees F. Great portable welder kit includes, extra plastic rods, reinforcing mesh, hot iron stand and wir


Tig-Pen Welding Finger Feeder Rod Holder Pencil Filler Metal
By Tig-Pen
In Stock
$37.98
$37.97

mpn: PW1550, ean: 0775709015500,

4.7 out of 5 stars with 15 reviews
Tig holder holds your filler rod and lets you advance the filler wire by thumb wheel .Tig finger feeder feeds tig filler rod comfortably. Hold the feeder like a pen or pencil. Insert the tig filler wire from the rear of the unit – not from the front. With the feeder comfortable in your hand, advance the wire by rolling the rubber wheel with the tip of your index finger. Suitable for tig wire diameters 0.8mm (.030”) to 3.2mm (1/8”).Tig filler rod feeder. Tig holder holds your filler rod and


Tack Flux no clean in a 10cc syringe w/plunger & tip
By ChipQuik
In Stock
$15.96
$14.49
You Save: 9%

mpn: SMD291, ean: 8944467166799,

4.9 out of 5 stars with 27 reviews
Remove QFDs, PLCCs, SOICs and chip components without costly and complex equipment. Use ChipQuik with your existing rework equipment or temperature controlled soldering irons. Special removal alloy has excellent wetting ability with a low melting temperature of 136F (58C). To use: apply paste flux to all leads with syringe; melt ChipQuik alloy on all pins of SMD; with wide iron tip; maintain alloy in a molten state long enough to release chip; lift chip from board with pick-up tool. Safe, afford


AGPtek Argon CO2 Flow Meter Regulator Hose, Mig Tig, UNF5/8 ,6.56ft with Inert Gas Fitting
By AGPTEK
In Stock
$11.99

mpn: HF43C-AGP, ean: 0757440656860,

4.0 out of 5 stars with 43 reviews
Hose Length:6.56ft This Hose Is Standard UNF 5/8'' Package including:1x AGPtek Flow Meter Regulator HoseProfessional Flow Meter Regulator Manufacturer, our Argon Flow Meter fits Argon, CO2 and Argon/CO2 fixed, Suitable for most argon tanks,argon hose for miller or Lincoln welders.. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Rubber hose, Inert gas fitting, For argon welding gas. Hose Length:6.56ft ,This Hose Is Standard UNF 5/8''. Note: This hose suits for our AGPTEK Argon Flow Mete


Kester 24-6337-8800 50 Activated Rosin Cored Wire Solder Roll, 245 No-Clean, 63/37 Alloy, 0.031" Diameter
By Kester Solder
In Stock
$26.95
$25.09
You Save: 7%

mpn: 24-6337-8800, ean: 0700736594025,

4.5 out of 5 stars with 54 reviews
24-6337-8800245 No-Clean Flux Solder will create visually acceptable assemblies without the need and expense of cleaning. Solderability and efficiency are comparable to that of mildly activated rosin flux (RMA). Residues are non-corrosive, non-conductive and do not require removal in most applications.Wire gauge: 20 awg, 21 swg, 50 core and core size: 1.1 inch. 0.031 inch. Compatible with leaded and lead-free alloys.



Viewing Page 3 of 5