6.56FT Long Heat Gun, Homidic Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp


6.56FT Long Heat Gun, Homidic Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp by Homidic at My Core Franchise. Hurry! Limited time offer. Offer valid only while supplies last. Features: √ 100% Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical √ Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness √ There are heat vents in left and right sides to decreased the internal temp and extend its lifetime √ This excellent compact heat gun can be used for heating


6.56FT Long Heat Gun, Homidic Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp by Homidic
4.7 out of 5 stars with 7 reviews
Condition: New
Availability: In Stock
$12.99


Quantity:  

 


Product Description & Reviews

Features: √ 100% Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical √ Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness √ There are heat vents in left and right sides to decreased the internal temp and extend its lifetime √ This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun √ The temprature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you can turn off then turn on again for working continuously Specification: Material: Plastic ABS+PC Cable length: 6.56FT /180 cm Working temp.: About 200 ℃ Rated Power: 300W Rated voltage:110v Power: 50-60Hz  Working time: 8 minutes Power type: AC power supply Type: Constant temperature Attention: -Do not touch with water! Do not touch the hot nozzle. -Do not use outdoor. Keep it out reach of children. Keep 5-6cm distance between the heat tool and itrm. -Do not use more than 10 minutes continuously to prevent overheated. -This hot air gun is specially made for DIY, it can't not use in industry aspect Package includes:  1 x Hot Air Gun

Features & Highlights

  • ★ Long Cable Enough for Crafting : 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
  • ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
  • ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
  • ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
  • ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously

Additional Information

Brand:
Homidic
Manufacturer:
Homidic US
Category:
Soldering & Brazing Equipment
UPC:
632230381101
Publisher:
Homidic US
Binding:
Misc.
Package Weight:
0.7 pounds
Package Size:
3.3 x 2.1 x 10.4 inches

 


Have questions about this item (632230381101), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Homidic, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


ean: 0757818000424,
SEEKONE heat gun case, portable heat gun suitcase for SEEKONE Hot Air Guns. Adopting ABS material in the exterior, this carrying case is portable, lightweight, waterproof, convenient to carry with, delicate, rugged Difference Model holds the accessories completely and separated from the heat gun. Hook and loop tapes fix the cable, avoiding entanglement and chaos. These are capable of getting rid of disordered items thoroughly.【Customized Suitcase for SEEKONE Heat Gun】 SEEKONE Originally and

ean: 0696177813644,
The Yom soldering iron kit is suitable for beginners, Easy to use. If you are DIY and need to repair small parts, Yom soldering iron will do the job for you and is your best choice. If you are not sure whether Yom soldering iron can meet your requirements, try it any way. So, if you are dissatisfied with the purchase of Yom soldering iron, you return it for a full refund with No loss to you. Note Please follow the instruction manual for using your new Yom soldering iron. Included items 1 * Adjus

mpn: WLC100, ean: 7566908061930,
This 40 watt Soldering Station from Weller features a quality lightweight pencil iron and a cushioned foam grip with replaceable heating element. This product is ideal for hobbyist, DIY enthusiasts and students. The Weller WLC100 Soldering Station includes everything you need to start using solder to join metals and create efficient, electrical connections. Designed with the hobbyist and the do-it-yourself enthusiast in mind, this kit features a high-quality, lightweight pencil iron with variabl

mpn: GJM005-US, ean: 0612677964808,
ANBES Soldering Iron Kit design for various uses, from home DIY, electrical repairs jobs and other soldering project. upgrade version: ①adding an on/off switch, you can turn the soldering iron on or off. More safer and ease. ②8-in-1 precision pocket screwdriver, multiples tips for your solder, keep it inside the pocket. ③upgrade wire Cutter, you can cut and strip different size cable easily. Specification: work voltage: 110v work power: 60W temp Range: 200℃ - 450 ℃(392℉ - 842℉) sol