Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection
Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection by Zircon at My Core Franchise. MPN: 68277. Hurry! Limited time offer. Offer valid only while supplies last. The Zircon StudSensor e50 is an electronic edge finding stud finder. The e50's body design reduces normal scanning errors and can be comfortably held in either hand at any angle while the rubber over molded grip also provides a secure hold. The SS e50 easily locates the edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. In StudScan mode, the SSe50 locates the edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to D
Product Description & Reviews
The Zircon StudSensor e50 is an electronic edge finding stud finder. The e50's body design reduces normal scanning errors and can be comfortably held in either hand at any angle while the rubber over molded grip also provides a secure hold. The SS e50 easily locates the edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. In StudScan mode, the SSe50 locates the edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, an arrow-shaped SpotLite Pointer will illuminate and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor e50, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.
Features & Highlights
- The Zircon SS e50 electronic stud scanner detects the edges of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazards while mounting a TV, hanging cabinets, installing garage shelving and more
- StudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep while DeepScan mode locates targets up to 1.5 inches (38 mm) deep
- WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
- Patented "Over the Stud" Indicator and SpotLite Pointing System ensure the e50 provides trustworthy results while the ergonomic grip design allows for comfortable use regardless of hand size
- One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance
Scanners & Testers
Tools & Home Improvement
4 x 2 x 8.5 inches
6.3 x 3.46 x 9.53 inches
Have questions about this item (68277), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Zircon, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 52300, ean: 0827165741261,
The Stud Ball is a protected magnetic stud finder that will out perform and other type of magnetic stud finder on the market. Unlike other steel stud finders, the Stud Ball can detect metal through 1/2″ or 5/8″ drywall or other thicker building materials. Will also work through ceramic tiling and up to 3/4″ plywood panelingRare Earth magnetic with 27 pounds of pull, No batteries required. Manufacturer part number - RAK52300. Detects screws or nails in wood frame walls. Colors May Vary.. Wi
Stud Finder, 5 in 1 Multifunctional Wall Scanner Detector with Digital LCD Display & Sound Warning for Studs/Wood/Metal/Live AC Wires Upgraded stud finder for home renovator and decorator!! OPERATING TIPS: √ Grasp the handle with your thumb on one side and your fingers on the other side. Make sure your fingertips are resting on the handle and not touching the surface being scanned or the scanning head of the tool. √ Hold the tool straight up and down, parallel to the studs, and do not rota
mpn: Soeks F4, ean: 4655299806008,
SOEKS EcoVisor F4 Newest Model is the first in the World 5-in-1 detector precisely measures and detects Radiation, Radiation Dose, Nitrates, EMFs and Water Quality. SOEKS EcoVisor 5-in-1: Geiger Counter, Dosimeter, Nitrate Tester, EMF Meter, Water Quality Detector offers the ULTIMATE protection for the whole family. Patented design and technology. Loaded with unique functions that make the detector extremely easy to use and reliable, allowing it to stand out from any competition: Touch Screen a
mpn: AQ9600, ean: 5060529680454,
Test particle size: 0.3Μm/2.5Μm/10.0Μmlight source: Semiconductor lasersaccuracy:± 5%temperature range: 0~50℃ /32~122℉accuracy: ± 5%humidity range: 0~100%rhaccuracy:±2% RHTest particle size: 0.3μm/2.5μm/10.0μm, (0.3um in Piece/L only, three sizes all in Piece/L unit). Light source: Semiconductor lasers. Counting efficiency:100±firstname.lastname@example.orgμm. Alarm levels:1~100,000(FED209E Standard) 2~9(ISO14464-1Standard). , Sampling Custom(1s~ 59min. 59s) ,Sampling frequency:1~99/Continuous, Power: 9